Boat Shade Installation & Maintenance

Boat Shade Kit

Simply attach the shade under the back of the T-top using the webbing straps and stretch it towards the telescoping poles in your rod holders to create a rear canopy. Remove the poles and attach it to the transom cleats to create a rear slant back. In some cases you can attach it under the front of the T-top and stretch it forward to the bow rail or cleats to create a bow shade.

Watch the video for more information.

Harbor Shade Kit

Simply attach the shade under the overhang using suction cups (with D-rings) or to framework using the connector straps. Insert the telescoping poles into the rod holders you want to use and stretch the shade back to the poles and snap to the connectors. Tighten the shade as needed, use the center support strap for times when you’re underway, this will keep the shade from blowing down. Check out the video below for more information.

Watch the video for more information.

T-Top Boat Shade Kit Easy Maintenance

The best way to keep your Boat Shade fabric looking good is to spray your cover off with clear water when needed. This helps prevent dirt or bird droppings from becoming deeply embedded in the fabric.

We recommend that you clean your Boat Shade following these simple steps:
  1. Wipe off any loose dirt
  2. Spray with clear water only
  3. Use a soft cotton rag to wipe clean
  4. Rinse thoroughly until all dirt or droppings are removed
  5. Air dry

NEVER USE A CLEANING CHEMICAL OR SPRAY TO CLEAN THE SHADE. IT MAY REMOVE THE REFLECTIVE COATING.

NEVER ADD A WATER REPELENT TO SHADE, IT MAY DESTROY THE REFLECTIVE COATING.